Transponder And Remote Controls Programming Manual Vehicles Models
- Transponder and remote controls programming manual models All Brand Car
- Including key programming, chip recognition, key duplication, proximity remote control, key origin of factory, aftermarket keys, and more, listed by manufacturer, model, and year for easy lookup
- Setting the Controls, Get all controls can be programmed up to 3 controls
- Turn the ignition ON
- Point the remote at the lock control module located under the glovebox
- Remove the Key Immobilizer Programming, The immobilizer can only be programmed with diagnostic equipment, You can program up to 6 keys programmed
- Control Programming, From the contact using the key that has no command, Lock the driver's door manually with the key
- The system will give you thirty seconds to carry out the programming of each of the keys
- Before 5 seconds have elapsed, press the "Unlock" button to confirm the position memory 1
- The direction indicators flash once to indicate that the signal has been received
- Remove contact
- The vehicle is unlocked and the programming mode is disabled and can remove the key, Always remove the contact between the programming procedures keys
- The doors will lock and unlock to confirm programming, Control Programming Get all vehicle controls, Access to the data connector located below the steering
Tags:
BOOKS